Aluminium access, configured to the working height.
Double- and narrow-width mobile towers, stair towers, podium units and custom platforms for indoor, façade and industrial maintenance work.
Aluminium access systems provide safe, quickly-assembled work platforms for maintenance, façade, fit-out and industrial applications. Schach supplies standard configurations and engineers custom platforms where geometry, load class or access require it.
Height class, platform size and configuration are selected against the applicable standard for the specific arrangement. Where a configuration exceeds the standard range of prefabricated mobile access towers, a tied or project-specific engineered solution is prepared.
- 01
Rapid assembly
Lightweight aluminium components handled without lifting equipment for standard configurations.
- 02
Configurable platforms
Standard widths and heights, plus bespoke geometry for restricted or heavily-serviced areas.
- 03
Sale or hire
Purchase or hire subject to product and market availability, with inspection and maintenance support.
- 04
Documented handover
Assembly, user and inspection instructions issued with each unit; on-site briefing available on request.
Principal components across a typical configuration.
- 01Vertical frame
- 02Horizontal brace
- 03Diagonal brace
- 04Platform deck (hatch)
- 05Toe boards
- 06Guardrails
- 07Adjustable base jack
- 08Castor / wheel
- 09Stabiliser / outrigger
- 10Ladder / stair unit
- 11Access hatch
- 12Identification label
Specification values are configuration-dependent and confirmed on the technical proposal.
- Frame material
- Aluminium alloy
- Widths
- Narrow (single) and double
- Platform sizes
- Configuration-dependent
- Standard applicable
- Selected per configuration; stated on the technical proposal
- Availability
- Sale and hire (subject to market)
- Documentation
- Assembly, user, inspection & maintenance instructions
What to send us.
To scope the system accurately, our engineers work from the following information:
- Required working / platform height and area of use
- Indoor or outdoor use
- Floor condition and load-bearing capacity
- Access restrictions (doors, obstructions, headroom)
- Load class required
- Frequency and duration of use
Aluminium mobile access towers are supplied against the applicable standard for the specific configuration. Height limits, load class, tie requirements and operating instructions are stated on the technical proposal and user manual issued for the unit.
Applicable standards, design responsibilities and permitted configurations vary by product, application and jurisdiction. These are confirmed in the technical proposal and supporting documentation.
Available on request.
Catalogues, technical data sheets, assembly and inspection guidance are issued against confirmed enquiries under controlled release.
- Fit-out & building services
- Façade access
- Industrial maintenance
- Aviation & hangar work
- Podium & low-level access
- Cantilever & restricted access
Aluminium access towers, platforms and applications.
Reference imagery of components and system configurations. Click any image to enlarge.
Speak to Schach Systems about price, availability and technical scope.
Whether the requirement is a standard product, a complete system or a project-specific design, our team will identify the appropriate route.